After upgrading from Fedora 10 to 11 using the following instructions, I encountered the errors detailed below. http://www.cyberciti.biz/faq/upgrade-fedora-11/ Upon boot, immediately encountered the following error. ?Traceback (most recent call last):? File “/usr/sbin/yum-updatesd” . line 41. in <module>??? from yum.config import BaseConfig. Option, IntOption, ListOption, BoolOptionImportError: No module name yum.config Upon trying to run #yum update […]
Author Archive | techdruid
Fedora 10-11 upgrade, kickstart problems
This problem was encountered when upgrading Fedora 10 to 11 using the instructions at the following URL. ?http://www.cyberciti.biz/faq/upgrade-fedora-11/ There is a hint of the solution on the above page by Dave Miller, but I found that it did not work for me. — Error Message — Unable to download the kickstart file.? Please modify the […]
68 Miles – 26-Jun-2009
Champoeg State Park to Salem round trip. The MapMyRide.com route shows that this ride is? 73 miles.? However, the odometer read just under 68 miles at the end of this ride. Click HERE to see the map on MapMyRide.com. ? ?
48 Miles – 14-Jun-2009
Greham, Oregon.? Portland Oregon.? Portland University.? Adorn Body Art.? Mt Tabor. Ok, this was my first attempt at creating an image using MapMyRide.com.? I’ve got way more arrows on the map than is necessary, but I’ll fix this on followup rides. Click HERE to see the map on MapMyRide.com This day, I rode approximately 48 […]
Bike Log Overview
Eventually I’ll have pictures for a lot of my rides in here.? I need to find a good camera first.? So far I’ve been unable to find a camera that fits my needs. Basically, I’ll be detailing just about every single bike ride I go on.? While I have a desire to know how many […]
Plesk inside OpenVZ memory problems
I believe that the errors encountered below when installing Plesk inside an OpenVZ Virtual Environment (VE) were encountered as a result of memory allocation issues.? Plesk recommends 256MB RAM minimum for 100 domains. However, I’ve found that this does not seem to be enough in a VE. On the hardware node (HN), here is the […]
OpenVZ free memory in container not correct
According to the recommendation on the OpenVZ page below, Table C recommends settings for 256MB RAM for a container (VE) that seems incorrect to me. http://wiki.openvz.org/UBC_configuration_examples_table For the values of privvmpages, vmguarpages, oomguarpages, & shmpages, the values are multiplied by 4 in terms of available memory on the VE.? For this reason, the recommended values […]
date: cannot set date: Operation not permitted (OpenVZ)
Upon installation of an OpenVZ container (VE/Virtual Environment) I was unable to set the date, and the time-zone was incorrect.? Attempts to set the date resulted in the following error. # date 031612482009 date: cannot set date: Operation not permitted To correct this problem, exit from the container (#exit) and issue the following commands. […]
DNS not resolving in openvz container (VE)
After creating and starting a container on OpenVZ, dns was not functioning by default.? Pinging google receives the following error. # ping -c 1 www.google.comping: unknown host www.google.com Whoa, this page seems a bit overkill.http://wiki.openvz.org/Setting_up_an_iptables_firewall Instead, I simply added the following two lines to /etc/sysconfig/iptables /etc/sysconfig/iptables (on HN) -A RH-Firewall-1-INPUT -d #.#.#.# […]
Plesk inside OpenVZ Container
I’m currently installing Plesk inside OpenVZ.? I have run into various problems with the way the wiki on OpenVZ.org explains setting it up, and how I’m actually ending up setting it up.? This page documents all my settings, and will likely point to other pages with errors that were encountered using the settings described on […]